Product Overview:

After the camera starts normally, it receives infrared commands and executes them. Press the remote control button, and the remote control reception indicator light flashes. Release the button, and the indicator light stops flashing. You can use the infrared remote control to perform preset position setting, position taking, horizontal, pitch rotation, and other operations.

Usage:

1. Standby key

After pressing, the camera enters standby mode. Pressing the camera again will restart it.

2. Number keys

Set preset position or call preset position

3. * Key

Use in conjunction with other buttons

4. Set preset key

Set preset position: Save a preset position

Set preset+numeric key (0-9): Set a preset position corresponding to the numeric key

5. Pan tilt control key 【 HOME 】

After pressing, the pan tilt returns to the middle position

6. Return key

After pressing, the OSD menu returns to the previous level menu.

7. Zoom key

Zoom Slow: Slowly widen the lens angle [+] or narrow the angle [-]

Zoom fast: quickly widen the lens angle [+] or narrow the angle [-]

8. Left and right setting keys

Use the pan tilt left and right turn settings, in conjunction with the number 1 and number 2 keys, to set the direction of the pan tilt and rotate it left or right according to the requirements of the pan tilt control keys

Left and right setting keys+1 (standard): Set the pan tilt direction to be consistent with the direction of the pan tilt control keys

Left and right setting keys+2 (reverse): Set the pan tilt direction to be opposite to the direction of the pan tilt control keys

9. Focus key

Focusing on usage

[Auto] key switches camera focus mode to automatic focus

[Manual] key switches camera focus mode to manual focus

In manual focusing mode, you can focus on distant objects or close objects by pressing [Far end].

10. Camera selection key

Select the camera that needs to be controlled

11. # Key

Use in conjunction with other buttons

12. Infrared remote control address selection key

[*]+[#]+[F1]: Address 1

[*]+[#]+[F2]: Address 2

[*]+[#]+[F3]: Address 3

[*]+[#]+[F4]: Address 4

13. Clear preset key

Cancel preset position: Clear a preset position

Clear preset+numeric key (0-9): Cancel the corresponding preset position or: [*]+[#]+[Clear preset] key: Cancel all preset positions

14. Pan tilt control key

Press to move the pan tilt in the direction indicated by the arrow. Press the [HOME] key to return to the middle position.

15. Menu keys

Press to enter or exit the OSD menu.

16. Backlight compensation key

Backlight ON/OFF: Turns backlight compensation on/off (cyclic effect) (note: only effective when exposure mode is automatic)

Explanation: If there is a light source behind the subject, the subject will become dark. In this case, press the backlight ON/OFF key. To cancel this function, press the backlight ON/OFF button again.

17. Pan tilt reset button

After pressing, the pan tilt starts self checking

18. Image freezing function

Manual freezing: After pressing the F4 button on the remote control, the image freezing function will be turned on, and the "image freezing" character will be displayed in the upper left corner of the image. The character will disappear automatically after 5 seconds of display. If you need to unfreeze, press the 【 F4 】 button again to restore normal operation. The character "Unfreeze Image" will be displayed in the upper left corner of the image, and it will disappear automatically after 5 seconds of display.

Freeze image when calling preset position: Set the "Freeze image during preset position" function through the OSD menu; After this function is enabled, when calling the preset position, the picture will stay in the picture before the preset position is adjusted until the camera points to the preset position; The screen can only be switched to the preset position

19. Shortcut settings

[*]+[#]+[1]: The OSD menu defaults to English

[*]+[#]+[3]: The OSD menu defaults to Chinese

[*]+[#]+[4]: Check the network IP address

[*]+[#]+[5]: Save OSD settings

[*]+[#]+[6]: Quickly restore default settings

[*]+[#]+[8]: View camera version number

[*]+[#]+[9]: Quickly set up inversion